System Display Settings - Keysight x-series User Reference Manual

Default Unit
Initial S/W Revision

System Display Settings

These settings are "Mode Global" – they affect all modes and measurements and are reset only by Restore
Misc Defaults or Restore System Defaults under System.
Key Path
Initial S/W Revision
Annotation Local Settings
This is a Mode Global override of the meas local annotation settings. When it is All Off, it forces
ScreenAnnotation, Meas Bar, Trace, and Active Function Values settings to be OFF for all measurements
in all modes. This provides the security based "annotation off" function of previous analyzers; hence it uses
the legacy SCPI command.
When it is All Off, the Screen, Meas Bar, Trace, and Active Function Values keys under the Display,
Annotation menu are grayed out and forced to Off. When Local Settings is selected, you are able to set the
local annotation settings on a measurement by measurement basis.
Key Path
Remote Command
Example
Preset
State Saved
Backwards Compatibility
Notes
Initial S/W Revision
Themes
Accesses a menu of functions that enable you to choose the theme to be used when saving the screen
image.
The Themes option is the same as the Themes option under the Display and Page Setup dialogs. It allows
you to choose between themes to be used when saving the screen image.
Key Path
Remote Command
EMI Receiver Mode Reference
Depends on the current selected Y axis unit
Prior to A.02.00
View/Display, Display
Prior to A.02.00
View/Display, Display, System Display Settings
:DISPlay:WINDow[1]:ANNotation[:ALL] OFF|ON|0|1
:DISPlay:WINDow[1]:ANNotation[:ALL]?
:DISP:WIND:ANN OFF
On (Set by Restore Misc Defaults)
Not saved in instrument state.
The WINDow parameter and optional subopcode is included for backwards compatibility but ignored
– all windows are equally affected.
Prior to A.02.00
Save, Screen Image
:MMEMory:STORe:SCReen:THEMe TDColor | TDMonochrome | FCOLor |
FMONochrome
8 Frequency Scan Measurement
View/ Display
601