Scroll Right
Scrolls the disturbance list to the right.
Key Path
Notes
Initial S/W Revision
Sort Disturbances
Specifies the disturbance list sorting either based on the duration, detector amplitude, type of disturbance
or time in ascending or descending order. During sorting, an advisory message appears on the message
bar, "Sorting disturbance list by <sorting type selected>...", for example:
Sorting signal list by Duration...
Key Path
Remote Command
Example
Dependencies
Preset
State Saved
Range
Initial S/W Revision
By Duration
Specifies the disturbance list will be sorted based on the duration.
Key Path
Example
Initial S/W Revision
By Detector Amplitude Type
Specifies how the signal list will be sorted based on the detector amplitude type.
Key Path
Remote Command
EMI Receiver Mode Reference
Meas Setup, Disturbance List, Navigate
Front panel only.
A.14.00
Meas Setup, Disturbance List, Sort Disturbances
CALCulate:DANalyzer:DLISt:SORT:TYPE DURation | DAMPlitude |
TDISturbance | TIME
CALCulate:DANalyzer:DLISt:SORT:TYPE?
CALC:DAN:DLIS:SORT:TYPE DUR
CALC:DAN:DLIS:SORT:TYPE?
Selecting a sorting mode (pressing the key or sending the equivalent SCPI command) will turn on the
Auto Sort state, even if that sorting mode was already selected.
TIME
Saved in instrument state
By Duration | By Detector Amplitude | By Type of Disturbance | By Time
A.14.00
Meas Setup, Disturbance List, Sort Disturbances
CALC:DAN:DLIS:SORT:TYPE DUR
A.14.00
Meas Setup, Disturbance List, Sort Disturbances, By Detector Amplitude
CALCulate:DANalyzer:DLISt:SORT:DAMPlitude PEAK|QPEak
12 Disturbance Analyzer Measurement
Meas Setup
1061