Configuration List (Remote Command Only) - Keysight x-series User Reference Manual

Configuration list (Remote Command Only)

This remote command is used to set or query the list of applications to be loaded in-memory.
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision
Configuration Memory Available (Remote Command Only)
This remote command is used to query the amount of Virtual Memory remaining.
Remote Command
Example
Preset
Initial S/W Revision
Configuration Memory Total (Remote Command Only)
This remote command is used to query the limit of Virtual Memory allowed for applications.
Remote Command
Example
Preset
Initial S/W Revision
Configuration Memory Used (Remote Command Only)
This remote command is a query of the amount of Virtual Memory used by all measurement applications.
Remote Command
Example
Preset
Initial S/W Revision
EMI Receiver Mode Reference
:SYSTem:PON:APPLication:LLISt <string of INSTrument:SELect names>
:SYSTem:PON:APPLication:LLISt?
:SYST:PON:APPL:LLIS "SA,BASIC,WCDMA"
<string of INSTrument:SELect names> are from the enums of the :INSTrument:SELect command.
The order of the <INSTrument:SELect names> is the order that the applications are loaded into
memory, and the order that they appear in the Mode Menu.
Error message –225 "Out of Memory" is reported when more applications are listed than can reside
in Virtual Memory. When this occurs, the existing applications load list is unchanged.
Not affected by Preset
Not saved in instrument state
A.02.00
:SYSTem:PON:APPLication:VMEMory[:AVAilable]?
:SYST:PON:APPL:VMEM?
Not affected by Preset
A.02.00
:SYSTem:PON:APPLication:VMEMory:TOTal?
:SYST:PON:APPL:VMEM:TOT?
Not affected by Preset
A.02.00
:SYSTem:PON:APPLication:VMEMory:USED?
:SYST:PON:APPL:VMEM:USED?
Not affected by Preset
A.02.00
6 System Functions
System
289