The :HCOPy command is equivalent to pressing the PRINT key. The HCOPy:ABORt command can be used
to abort a print which is already in progress. Sending HCOPy:ABORt will cause the analyzer to stop
sending data to the printer, although the printer may continue or even complete the print, depending on
how much data was sent to the printer before the user sent the ABORt command.
Key Path
Remote Command
Initial S/W Revision
Key Path
Remote Command
Initial S/W Revision
Restore Down
This key allows you to Restore Down the Instrument Application and reverses the action taken by
Maximize. This key is only visible when the application has been maximized, and after the Restore Down
action has been completed this key is replaced by the Maximize key.
Key Path
Mode
Notes
State Saved
Initial S/W Revision
Minimize
The Minimize key causes the analyzer display to disappear down into the task bar, allowing you to see the
Windows Desktop. You can use Alt-Tab (press and hold the Alt
key) to restore the analyzer display.
Key Path
Mode
Notes
State Saved
Initial S/W Revision
EMI Receiver Mode Reference
Front-panel key
:HCOPy[:IMMediate]
Prior to A.02.00
SCPI command only
:HCOPy:ABORt
Prior to A.02.00
File
All
No equivalent remote command for this key.
No
A.05.01
File
All
No equivalent remote command for this key.
No
A.05.01
6 System Functions
key and press and release the Tab
File
269