Sort Signals - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Meas Setup
Dependencies
Initial S/W Revision

Sort Signals

Specifies how the elements in the signal list will be sorted either based on the frequency, detector
amplitude, detector vs. limit delta or time in ascending or descending order. During sorting, an advisory
message appears at the message bar, "Sorting signal list by <sorting type selected>...", for example:
Sorting signal list by Frequency...
Sorting signal list by Det 1 Amplitude...
Sorting signal list by Det 3 vs Limit Delta...
Sorting signal list by Det 3 vs TimeStamp...
Key Path
Remote Command
Example
Dependencies
Couplings
Preset
State Saved
Range
Initial S/W Revision
By Freq
Specifies that the elements in the signal list will be sorted based on the frequency.
Key Path
Example
Initial S/W Revision
448
This key is grayed out before Marker Zoom is performed. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–200, Execution error" warning.
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.07.00
Meas Setup, Signal List, Sort Signals
:CALCulate:FSCan:SLISt:SORT:TYPE FREQuency | DAMPlitude | DLDelta |
TIME
:CALCulate:FSCan:SLISt:SORT:TYPE?
CALC:FSC:SLIS:SORT:TYPE FREQ
CALC:FSC:SLIS:SORT:TYPE?
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
Selecting a sorting mode (pressing the key or sending the equivalent SCPI command) will turn on the
Auto Sort state, even if that sorting mode was already selected.
FREQuency
Saved in instrument state.
By Freq|By Detector Amptd|By ( Detector|By Time
A.07.00
Meas Setup, Signal List, Signal List, Sort Signals
CALC:FSC:SLIS:SORT:TYPE FREQ
A.07.00
EMI Receiver Mode Reference