Trace Display (Remote Command Only) - Keysight x-series User Reference Manual

Remote Command Notes
Backwards
Compatibility SCPI
Backwards Compatibility
SCPI Notes
Initial S/W Revision

Trace Display (Remote Command Only)

This SCPI sets the state of the trace's Update state.
Remote Command
Example
Notes
Backwards
Compatibility SCPI
Initial S/W Revision
EMI Receiver Mode Reference
When TRACE1, the latest contents of trace 1 will be returned.
When TRACE2, the latest contents of trace 2 will be returned.
When TRACE3, the latest contents of trace 3 will be returned.
When SINGle, the current power values of all activated meters are returned separated by commas in
the order meters number.
:TRACe[:DATA]?
This command is included for ESU compatibility. The SCPI is Meas Local and Context Sensitive.
A.13.00
DISPlay[:WINDow]:TRACe[1]|2|3[:STATe] ON|OFF|1|0
DISPlay[:WINDow]:TRACe[1]|2|3[:STATe]?
DISP:TRAC OFF
DISP:TRAC?
This command is included for ESU compatibility. The suffix [1]|2 and [1]|2|3 are irrelevant to the
measurement, they are added solely for remote language compatibility. This SCPI alias to :TRACe[1]
|2|3:MONitor:UPDate ON|OFF|1|0.
DISPlay:WINDow[1]|2:TRACe[1]|2|3[:STATe]
A.13.00
10 Monitor Spectrum Measurement
Trace/ Detector
873