Last Span - Keysight x-series User Reference Manual

Preset
State Saved
Min
Max
Default Unit
Status Bits/OPC
dependencies
Initial S/W Revision

Last Span

Changes the displayed frequency span to the previous span setting. If it is pressed immediately after
Signal Track is turned off, then the span setting returns to the span that was in effect before Signal Track
was turned on.
Key Path
Remote Command
Example
Initial S/W Revision
EMI Receiver Mode Reference
200 kHz
100 kHz
50 kHz
20 kHz
10 kHz
5 kHz
2 kHz
1 kHz
1 MHz
Saved in instrument state
1 kHz
10 MHz
Hz
non-overlapped
A.13.00
SPAN X Scale
[:SENSe]:MONitor:FREQuency:SPAN:PREVious
:MON:FREQ:SPAN:PREV sets the span to the previous value
A.13.00
10 Monitor Spectrum Measurement
100 Hz – 1 kHz
100 Hz – 1 kHz
30 Hz – 300 Hz
10 Hz – 100 Hz
10 Hz – 100 Hz
10 Hz – 30 Hz
10 Hz – 30 Hz
10 Hz – 30 Hz
SPAN X Scale
863