Questionable Calibration Extended Needed Event Query - Keysight x-series User Reference Manual

3 Programming the Analyzer
STATus Subsystem
Max
Status Bits/OPC
dependencies
Initial S/W Revision

Questionable Calibration Extended Needed Event Query

This query returns the decimal value of the sum of the bits in the Questionable Calibration Extended
Needed Event register.
The register requires that the associated PTR or NTR filters be set before a condition register bit can set a
bit in the event register. The data in this register is latched until it is queried. Once queried, the register is
cleared.
Mode
Remote Command
Example
Preset
Status Bits/OPC
dependencies
Initial S/W Revision
Questionable Calibration Extended Needed Negative Transition
This command determines which bits in the Questionable Calibration Extended Needed Condition register
will set the corresponding bit in the Questionable Calibration Extended Needed Event register when the
condition register bit has a negative transition (1 to 0). The variable <integer> is the sum of the decimal
values of the bits that you want to enable.
Mode
Remote Command
Example
Preset
Min
Max
Status Bits/OPC
dependencies
Initial S/W Revision
124
32767
Sequential command
Prior to A.02.00
All
:STATus:QUEStionable:CALibration:EXTended:NEEDed[:EVENt]?
STAT:QUES:CAL:EXT:NEED?
0
Sequential command
Prior to A.02.00
All
:STATus:QUEStionable:CALibration:EXTended:NEEDed:NTRansition <integer>
:STATus:QUEStionable:CALibration:EXTended:NEEDed:NTRansition?
STAT:QUES:CAL:EXT:NEED:NTR 2 Align EMI conducted is not required.
0
0
32767
Sequential command
Prior to A.02.00
EMI Receiver Mode Reference