Internal Preamp State (Remote Command Only) - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
AMPTD Y Scale
"Grid Top Level (Remote Command Only)" on page 395

Internal Preamp State (Remote Command Only)

This SCPI command is used to set the Internal Preamp state of the meters display.
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision
Grid Bottom Level (Remote Command Only)
This command defines the bottom grid level in the current unit for the scan display.
Remote Command
Example
Notes
Couplings
Preset
State Saved
Min
Max
Backwards
Compatibility SCPI
Backwards Compatibility
SCPI Notes
Initial S/W Revision
394
:INPut[1]|2:GAIN[:STATe] ON|OFF|1|0
:INPut[1]|2:GAIN[:STATe]?
INP:GAIN ON
INP:GAIN?
This command is included for ESU compatibility. The suffix [1]|2 is irrelevant to the measurement,
they are added solely for remote language compatibility.
ON is aliased to POW:GAIN ON; :POW:GAIN:BAND LOW.
OFF is aliased to POW:GAIN OFF.
OFF
Saved in instrument state
A.07.00
:DISPlay[:WINDow]:TRACe[1]|2|3:Y[:SCALe]:BOTTom <real>
:DISPlay[:WINDow]:TRACe[1]|2|3:Y[:SCALe]:BOTTom?
DISP:TRAC:Y:BOTT 5
DISP:TRAC:Y:BOTT?
This command is included for ESU compatibility. The suffix [1]|2 and [1]|2|3 are irrelevant to the
measurement, they are added solely for remote language compatibility.
When this value is changed, the reference level will be changed based on:
Ref Level = Min Grid Level +10* Scale/Div
The value of bottom grid level will be recalculated based on the exact Ref Level value.
Similar to Ref Level, the allowed range of the Grid Level setting is affected by the Ref Level Offset
Value.
6.99 dBuV
Saved in instrument state.
–163.01 dBuV
36.99 dBuV
:DISPlay:WINDow[1]|2:TRACe[1]|2|3:Y[:SCALe]:BOTTom
The SCPI command is not stated in the ESU user manual, but it is used by the EMC32 application.
A.07.00
EMI Receiver Mode Reference