6 System Functions
System
Key Path
Mode
Remote Command
Example
Notes
Dependencies
State Saved
Initial S/W Revision
Key Path
Mode
Remote Command
Example
Notes
State Saved
Initial S/W Revision
Key Path
Mode
Remote Command
Example
Notes
State Saved
Key Path
Mode
Remote Command
Example
Notes
State Saved
306
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TEMPerature:LPReselector?
:CAL:TEMP:LPR?
Value is in degrees Centigrade at which the last successful Characterize Preselector was executed.
In models that do not include preselectors, this command is not enabled and any attempt to set or
query will yield an error.
No
Prior to A.02.00
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:AUTO:TIME:OFF?
:CAL:AUTO:TIME:OFF?
Value is the elapsed time, in seconds, since Auto Align has been set to Off or Off with Alert. The value
is 0 if Auto Align is ALL or NORF.
No
Prior to A.02.00
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TIME:RFPSelector:LCONducted?
:CAL:TIME:RFPS:LCON?
Values are the date and time the last successful Align Now, 20 Hz – 30 MHz was executed. The date
is separated from the time by a semi-colon character.
No
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TEMPerature:RFPSelector:LCONducted?
:CAL:TEMP:RFPS:LCON?
Value is in degrees Centigrade at which the last successful Align Now, 20 Hz – 30 MHz was
executed.
No
EMI Receiver Mode Reference