Key Path
Notes
Min
Max
Initial S/W Revision
Insert Point Below
Pressing this key inserts a point below the current point. The new point is a copy of the current point. And
becomes the current point The new point is not yet entered into the underlying table, and the data in the
row is displayed in light gray.
Key Path
Initial S/W Revision
Delete Point
This is an immediate action key. It will immediately delete the currently-selected point, whether or not
that point is being edited, and select Navigate. The point following the currently-selected point (or the
point preceding if there is none) will be selected.
Key Path
Initial S/W Revision
Copy from Limit
Copies an existing limit into the current limit, including all secondary parameters (Description, Associated
Trace, Type, Margin, Interpolation, Relative to CF/RL).
Key Path
Remote Command
Example
Notes
Backwards
Compatibility SCPI
Backwards Compatibility
SCPI Notes
Initial S/W Revision
EMI Receiver Mode Reference
Meas Setup, Limits, Edit
There is no value readback on the key
–1000 dBm
1000 dBm
A.02.00
Meas Setup, Limits, Edit
A.02.00
Meas Setup, Limits, Edit
A.02.00
Meas Setup, Limits, Edit
:CALCulate:FSCan:LLINe[1]|2|...|6:COPY LLINE1 | LLINE2 | LLINE3 |
LLINE4 | LLINE5 | LLINE6
CALC:FSC:LLINE2:COPY LLINE1 Copies the data from limit 1 into limit 2.
Auto return to the Edit menu.
:CALCulate[1]|2:LIMit[1]|2|...|6:COPY
This command above is included for ESU compatibility. The suffix [1]|2 is irrelevant to the
measurement, they are added solely for remote language compatibility.
A.07.00
8 Frequency Scan Measurement
Meas Setup
491