11 APD Measurement
Marker
Preset
State Saved
Min
Max
Initial S/W Revision
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision
Select Marker
Accesses a menu that allows you to select one of 12 markers for control and function.
Key Path
Initial S/W Revision
Normal
Sets the control mode for the selected marker to Normal and turns on the active function for setting its
value. If the selected marker was off, it is placed at the beginning the trace.
A Normal mode (POSition type) marker can be moved to any point on the X Axis by specifying its X Axis
value.
Key Path
Example
Couplings
State Saved
Initial S/W Revision
920
marker is Off the response is not a number.
After a preset, all Markers are turned OFF, so Marker X Axis Value query will return a not a number
(NAN).
No
25 dBuV
124.99 dBuV
A.13.00
:CALCulate:APD:MARKer[1]|2|...|12:Y?
CALC:APD:MARK11:Y?
The query returns the marker Y-axis result, if the control mode is Normal, or Delta. If the marker is
Off the response is not a number.
0
No
A.13.00
Marker
A.13.00
Marker
CALC:APD:MARK:MODE POS Sets Marker 1 to Normal.
The marker addressed by this command becomes the selected marker on the front panel.
Saved in instrument state.
A.13.00
EMI Receiver Mode Reference