Protective Earth - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Meas Setup
Example
Notes
Dependencies
Couplings
Preset
State Saved
Range
Initial S/W Revision

Protective Earth

Selects the ground settings of the V-network.
Key Path
Remote Command
Example
Notes
Dependencies
Couplings
Preset
State Saved
Range
Initial S/W Revision
Meas Preset
Returns the measurement local variables in the current measurement to their preset values.
Remote Command
Example
Initial S/W Revision
506
:SENSe1|SENSe2|[:SENSe]:FMEasurement:LISN:FILTer:HPAS[:STATe]?
:FME:LISN:FILT:HPAS ON
This key is only available when ENV216 V-network is selected.
This key is grayed out when V-network other than ENV216 is selected. If the grayed out key is
pressed, an advisory message is generated. If the equivalent SCPI command is sent, this same
message is generated as part of a "–221, Setting Conflict; Function not available with current LISN
Type" warning.
This key is coupled to 150kHz Highpass of LISN Control in Mode Setup panel, and vice versa.
OFF
Saved in instrument state
ON|OFF
A.13.50
Meas Setup, LISN Control, Settings
:SENSe1|SENSe2|[:SENSe]:FMEasurement:LISN:PEARth GROunded | FLOating,
[GROunded | FLOating]
:SENSe1|SENSe2|[:SENSe]:FMEasurement:LISN:PEARth?
:FME:LISN:PEAR GRO,FLO
This key is only available when ESH2Z5 V-network is selected.
This key is grayed out V-networks other than ESH2Z5 is selected. If the equivalent SCPI command is
sent, this same message is generated as part of a "–221, Setting Conflict; Function not available with
current LISN Type" warning.
If users try to turn off both protective earth from front panel, an advisory message is generated as "At
least one Protective Earth must be turned on".
Grounded
Saved in instrument state
GRO|FLO
A.13.50
:CONFigure:FSCan
CONF:FSC
A.07.00
EMI Receiver Mode Reference