Normal Marker Y Axis Value - Keysight x-series User Reference Manual

11 APD Measurement
Marker
Example
Notes
Preset
Initial S/W Revision

Normal Marker Y Axis Value

Enables you to set the selected marker to Normal mode, and gets the marker YAxis Values.
Remote Command
Example
Notes
Initial S/W Revision
Delta Marker State
Enables you to toggle the Delta marker state on/off.
Remote Command
Example
Notes
Preset
Initial S/W Revision
Delta Marker X Axis Value
Enables you to set the selected marker to Delta mode, and sets/ gets the marker X Axis Values. The
command input, in relative values, refers to the reference marker while the query always returns absolute
values in order to make it compatible with ESU.
Remote Command
Example
Notes
Preset
Initial S/W Revision
924
CALC:MARK3:X 30 Turn on maker 3 in Normal mode, by default will set the marker amplitude to 30
dBuV.
CALC:MARK3:X? Turn on maker 3 in Normal mode and query the X axis value.
This SCPI is alias to :CALC:APD:MARK[1]|2|3|4:MODE POS; :CALC:APD:MARK[1]|2|3|4:X?
25 dBuV
A.13.00
:CALCulate[1]|2:MARKer[1]|2|...|4:Y?
CALC:MARK3:Y? Turn on maker 3 in Normal mode and query the Y axis value.
This SCPI is alias to :CALC:APD:MARK[1]|2|3|4:MODE POS; :CALC:APD:MARK[1]|2|3|4:Y?
A.13.00
:CALCulate[1]|2:DELTamarker[1]|2|...|4[:STATe] ON|OFF|1|0
:CALCulate[1]|2:DELTamarker[1]|2|...|4[:STATe]?
CALC:DELT3 ON Turn on maker 3 in Delta mode.
This SCPI is alias to :CALC:APD:MARK[1]|2|3|4:MODE DELT.
OFF
A.13.00
:CALCulate[1]|2:DELTamarker[1]|2|...|4:X <value>
:CALCulate[1]|2:DELTamarker[1]|2|...|4:X?
CALC:DELT3:X 30 Turn on maker 3 in Delta mode, set the relative delta marker amplitude to 30 dB.
CALC:DELT3:X? Turn on maker 3 in Delta mode and query the X axis value.
This SCPI is alias to :CALC:APD:MARK[1]|2|3|4:MODE DELT; :CALC:APD:MARK[1]|2|3|4:X? returns the
relative values when marker in Delta mode.
25 dBuV
A.13.00
EMI Receiver Mode Reference