Sweeping (Hswp) - Keysight x-series User Reference Manual

Key Path
Example
Readback
Initial S/W Revision

Sweeping (HSWP)

Selects the Sweeping Trigger signal to be output to the Trig 1 Out, or Trig 2 Out, connector when a
measurement is made. This signal has historically been known as "HSWP" (High = Sweeping), and is 5 V
TTL level with 50 ohm output impedance.
Key Path
Example
Readback
Initial S/W Revision
Measuring
Selects the Measuring trigger signal to be output to the Trig 1 Out, or Trig 2 Out, connector. This signal is
true while the Measuring status bit is true.
Key Path
Example
Readback
Initial S/W Revision
Main Trigger
Selects the current instrument trigger signal to be output to the Trig 1 Out, or Trig 2 Out, connector.
Key Path
Example
Readback
Initial S/W Revision
Gate Trigger
Selects the gate trigger signal to be output to the Trig 1 Out, or Trig 2 Out, connector. This is the source of
the gate timing, not the actual gate signal.
EMI Receiver Mode Reference
Input/Output, Output Config, Trig 1/2 Output
TRIG1:OUTP OFF
Off
Prior to A.02.00
Input/Output, Output Config, Trig 1/2 Output
TRIG1:OUTP HSWP
Sweeping
Prior to A.02.00
Input/Output, Output Config, Trig 1/2 Output
TRIG1:OUTP MEAS
Measuring
Prior to A.02.00
Input/Output, Output Config, Trig 1/2 Output
TRIG1:OUTP MAIN
Main Trigger
Prior to A.02.00
4 Input/Output Functions
Input/Output
201