Meters Control - Keysight x-series User Reference Manual

5 Mode Functions
Mode Setup
R&S ESU 503, 507, 508, 513
526
550
R&S ESL 503
507, 508, 513, 526, 550
Key Path
Notes
Preset
State Saved
Initial S/W Revision

Meters Control

This key enables you to access settings for meters.
Key Path
Initial S/W Revision
Meters
Accesses a menu of functions that enable you set the meters' parameters.
Key Path
Initial S/W Revision
Select Meters
Specifies the selected meter. The term "selected meter" is used throughout this document to specify which
meter will be affected by the functions. There are a total of three meters.
Key Path
Notes
Preset
State Saved
Initial S/W Revision
248
Mode Setup
Front panel only.
System IDN Response, not affected by Mode Preset, preset by Restore Mode Defaults.
Saved in instrument state
A.07.00
Mode Setup
A.07.00
Mode Setup, Meters Control
A.07.00
Mode Setup, Meters Control, Meters
Front panel only. The selected meter is remembered even when not in the Meters Menu.
Meter 1, is not affected by a Mode Preset, but is preset by Restore Mode Defaults.
Saved in instrument state
A.07.00
ESU–8
ESU–26
ESU–40
ESL–3
ESL–6
EMI Receiver Mode Reference