I/O Config - Keysight x-series User Reference Manual

6 System Functions
System
Example
Notes
Preset
State Saved
Initial S/W Revision

I/O Config

Activates a menu for identifying and changing the I/O configuration for remote control.
Key Path
Initial S/W Revision
GPIB
Activates a menu for configuring the GPIB I/O port.
Key Path
Initial S/W Revision
GPIB Address
Select the GPIB remote address.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Min
Max
Initial S/W Revision
332
:CAL:RFPS:SCH:STAT OFF
For model N9038A only.
This is unaffected by Preset but is set to OFF on a "Restore System Defaults->Align".
No
A.08.00
System
Prior to A.02.00
System, I/O Config
A.02.00
System, I/O Config, GPIB
All
:SYSTem:COMMunicate:GPIB[1][:SELF]:ADDRess <integer>
:SYSTem:COMMunicate:GPIB[1][:SELF]:ADDRess?
:SYST:COMM:GPIB:ADDR 17
Changing the Address on the GPIB port requires all further communication to use the new address.
This is unaffected by Preset but is set to 18 on a "Restore System Defaults->Misc"
No
0 to 30
0
30
Prior to A.02.00
EMI Receiver Mode Reference