Mkr À Meters (Move Meters To Marker Freq) - Keysight x-series User Reference Manual

Mkr à Meters (Move Meters to Marker Freq)
Replaces Frequency (Meters) with the frequency identified by the selected marker.
Key Path
Remote Command
Example
Couplings
Initial S/W Revision
Metersà Mkr (Move Marker to Meters Freq)
Replaces the frequency of the selected marker with Frequency (Meters). If the Meters frequency is out of
the current span, an error is generated and the marker is not moved.
Key Path
Remote Command
Example
Couplings
Initial S/W Revision
Meters à Signal (Replace)
Replaces the frequency of the selected signal with Frequency (Meters). Amplitude values and the Delta To
Limit values will be shown as "---" to indicate an undefined value.
Key Path
Remote Command
Example
Notes
Initial S/W Revision
Meters à List (Append)
Appends the signal obtained at meters into the signal list. Amplitude values and the Delta To Limit values
will be shown as "---" to indicate an undefined value.
Key Path
EMI Receiver Mode Reference
Marker To
:CALCulate:FSCan:MARKer[1]|2|...|12:TO:METer
CALC:FSC:MARK2:TO:MET
If no marker is ON when this operation is performed, the default marker will be turned on.
A.07.00
Marker To
:CALCulate:FSCan:MARKer[1]|2|...|12[:SET]:METer
CALC:FSC:MARK2:MET
If no marker is ON when this operation is performed, the default marker will be turned on.
A.07.00
Marker To
:CALCulate:FSCan:SLISt:REPLace:METer <integer>
CALC:FSC:SLIS:REPL:MET 20 Replace Signal #20 with signal obtained at the meters.
If the signal list contains no data, an error is generated and this function cannot be performed.
If the selected signal is not in the list, an error is generated and this function cannot be performed.
A.07.00
Marker To
8 Frequency Scan Measurement
Marker To
425