Rf Trigger Source - Keysight x-series User Reference Manual

7 Trigger Functions
Trigger
EDGE EVM EDGE/GSM
EDGE ORFS EDGE/GSM
Combined WCDMA
WCDMA
Combined EDGE/GSM
GSM
List Power WCDMA,
Step EDGE/GSM
Transmit LTETDD
On/Off
Power
Transmit BLUETOOTH
Analysis
Adjacent BLUETOOTH
Channel
Power
LE In-band BLUETOOTH
Emissions
EDR In-band BLUETOOTH
Spurious
Emissions
Conformance LTE, LTETDD,
EVM MSR

RF Trigger Source

The RF Trigger Source command selects the trigger to be used for the specified measurement when RF is
the selected input. The RF trigger source can be queried and changed even while another input is selected,
but it is inactive until RF becomes the selected input.
Note the inclusion of the <measurement> parameter in the command below. Because each measurement
remembers its own Trigger Source, the command must be qualified with the measurement name. Note
that for the Swept SA measurement this is not the case; for backwards compatibility, no <measurement>
parameter is used when setting the Trigger Source for the Swept SA measurement.
Remote Command
Example
362
RFB
Periodic Timer
IMM
RFB
IMM
LTETDD:
BTS: External 1
MS: Periodic
Timer
RFB
IMM
IMM
Periodic Timer
IMM
:TRIGger:<measurement>[:SEQuence]:RF:SOURce EXTernal1 | EXTernal2 |
IMMediate | LINE | FRAMe | RFBurst | VIDeo | IF | ALARm | LAN | TV
:TRIGger:<measurement>[:SEQuence]:RF:SOURce?
TRIG:ACP:RF:SOUR EXT1
Selects the external 1 trigger input for the ACP measurement and the RF input
IQMag
IQ not
supported
IQ not
supported
IQ not
supported
IQ not
supported
LTETDD:
BTS: External
1
MS: Periodic
Timer
IQ not
supported
IQ not
supported
IQ not
supported
IQ not
supported
IMM
EMI Receiver Mode Reference