Using The Antenna/Cable Editor - Keysight FieldFox B Series User Manual

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings
—
—
—
When finished, press

Using the Antenna/Cable Editor

The Antenna Editor and the Cable Editor menus are very similar. Both tables
include header information, and a Frequency/Value table.
Figure 9-2 FieldFox Antenna Editor– E–Field and H-Field Units Displayed
Keysight N9938-90006 User's Guide
Save Antenna/Cable – Save the modified Antenna/Cable to a file on the
specified Storage Device.
Recall Antenna/Cable
specified Storage Device.
Storage Device – Choose from: Internal, USB, SD. Learn more about these
selections in "Set File Type and Select Device" on page
Back
E-Field Units
– Read an existing Antenna/Cable file from the
to return to the previous menu.
810.
H-Field Units
163