Scpi Lan - Keysight x-series User Reference Manual

6 System Functions
System

SCPI LAN

Activates a menu for identifying and changing the SCPI over a LAN configuration. There are a number of
different ways to send SCPI remote commands to the instrument over LAN. It can be a problem to have
multiple users simultaneously accessing the instrument over the LAN. These keys limit that somewhat by
disabling the telnet, socket, and/or SICL capability.
Key Path
Initial S/W Revision
SCPI Telnet
Turns the SCPI LAN telnet capability On or Off allowing you to limit SCPI access over LAN through telnet.
Key Path
Mode
Remote Command
Example
Preset
State Saved
Range
Initial S/W Revision
SCPI Socket
Turns the capability of establishing Socket LAN sessions On or Off. This allows you to limit SCPI access
over LAN through socket sessions.
Key Path
Mode
Remote Command
Example
Preset
State Saved
Range
Initial S/W Revision
334
System, I/O Config
Prior to A.02.00
System, I/O Config, SCPI LAN
All
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle?
:SYST:COMM:LAN:SCPI:TELN:ENAB OFF
This is unaffected by Preset but is set to ON with a "Restore System Defaults->Misc"
No
On | Off
Prior to A.02.00
System, I/O Config, SCPI LAN
All
:SYSTem:COMMunicate:LAN:SCPI:SOCKet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:SOCKet:ENABle?
:SYST:COMM:LAN:SCPI:SOCK:ENAB OFF
This is unaffected by a Preset but is set to ON with a "Restore System Defaults->Misc"
No
On | Off
Prior to A.02.00
EMI Receiver Mode Reference