Measure - Keysight x-series User Reference Manual

Measure

Specifies the signal coverage for the automated APD measurement.
Key Path
Remote Command
Example
Notes
Preset
State Saved
Range
Readback
Initial S/W Revision
Limits
Opens the Limit Lines menu that contains keys to control limit lines of the current measurement.
Key Path
State Saved
Initial S/W Revision
Select Limit
Specifies the selected limit. The term "selected limit" is used throughout this document to specify which
limit will be affected by the functions.
Key Path
Notes
Preset
State Saved
Initial S/W Revision
EMI Receiver Mode Reference
Meas Setup
[:SENSe]:APD:MEAS ALL|MARKed
[:SENSe]:APD:MEAS?
APD:MEAS ALL
APD:MEAS?
ALL = All Signals
MARKed = Marked Signals
ALL
Saved in instrument state.
All Signals| Marked Signals
All Signals| Marked Signals
A.13.00
Meas Setup
Saved in instrument state.
A.13.00
Meas Setup, Limits
Front panel only. The selected limit is remembered even when not in the Limit Menu.
Currently, there is only 1 limit line in this measurement. Limit line choices 2 through 6 will be grayed
out.
Limit 1
Saved in instrument state.
A.13.00
11 APD Measurement
Meas Setup
941