Scheduler - Keysight x-series User Reference Manual

Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Min
Max
Initial S/W Revision
Day
Enables you to set the Day of the Week the scheduler will run a scheduled task.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision

Scheduler

Setting the Scheduler to ON will trigger the execution of the scheduled task based on the recurrence and
time set in the scheduler since the last successful of the specific alignment. A warning condition of "RF
Preselector alignment scheduler is ON" will be appeared when the scheduler is set to ON. OFF will turn off
the Scheduler from running any scheduled task.
Key Path
Mode
Remote Command
EMI Receiver Mode Reference
All
:CALibration:RFPSelector:SCHeduler:RECurrence:WEEK <integer>
:CALibration:RFPSelector:SCHeduler:RECurrence:WEEK?
:CAL:RFPS:SCH:REC:WEEK 2
New scheduled date to run the alignment task will get updated when this parameter is changed. For
model N9038A only.
This is unaffected by Preset but is set to 1 on a "Restore System Defaults->Align".
No
1–52
1
52
A.08.00
System, Alignments, RF Preselector, Schedule Setup, Recurrence, Every N Weeks
All
:CALibration:RFPSelector:SCHeduler:RECurrence:DAY SUN | MON | TUE | WED
| THU | FRI | SAT
:CALibration:RFPSelector:SCHeduler:RECurrence:DAY?
:CAL:RFPS:SCH:REC:DAY SUN
For model N9038A only.
This is unaffected by Preset but is set to SUN on a "Restore System Defaults->Align".
No
Sunday|Monday|Tuesday|Wednesday|Thursday|Friday|Saturday
A.08.00
System, Alignments, RF Preselector
All
:CALibration:RFPSelector:SCHeduler:STATe ON|OFF|0|1
:CALibration:RFPSelector:SCHeduler:STATe?
6 System Functions
System
331