Copy Now - Keysight x-series User Reference Manual

8 Frequency Scan Measurement
Trace/ Detector
State Saved
Initial S/W Revision

Copy Now

Executes the Copy operation and puts the destination trace in Update=Off, Display=On.
Key Path
Remote Command
Example
Notes
Dependencies
Initial S/W Revision
Exchange Now
Executes the Exchange operation and puts both traces in Update=Off, Display=On.
Key Path
Remote Command
Example
Notes
Dependencies
Initial S/W Revision
Send/Query Trace Data (Remote Command Only)
This command allows trace data to be sent to the instrument or queried from the instrument. The response
to the query is a list of amplitude points that comprise the requested trace in the current Y Axis Unit of the
analyzer. The X Axis Unit is that of the destination trace (for send) or the source trace (for query).
586
Saved in instrument state.
A.07.00
Trace/Detector, Copy/Exchange
:TRACe:FSCan:COPY TRACE1|TRACE2|TRACE3, TRACE1|TRACE2|TRACE3
TRAC:FSC:COPY TRACE1, TRACE3 Copies Trace 1 to Trace 3 and puts Trace 3 in Update=Off,
Display=On.
The TRACe:FSCan:COPY command is of the form:
:TRACe:FSCan:COPY <source_trace>,<dest_trace>
In the case of a Copy, the destination trace is put in Update=Off, Display=On after the copy. In the
case of an Exchange, both traces are put into Update=Off, Display=On after the exchange.
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.07.00
Trace/Detector, Copy/Exchange
:TRACe:FSCan:EXCHange TRACE1 | TRACE2 | TRACE3, TRACE1 | TRACE2 |
TRACE3
TRAC:FSC:EXCH TRACE1, TRACE2 Exchanges Trace 1 and Trace 2 and puts both traces in
Update=Off, Display=On.
The TRACe:FSCan:EXCHange command is of the form:
:TRACe:FSCan:EXCHange <trace_1>,<trace_2>
This key is grayed out when a scan sequence is running. If the grayed out key is pressed, an advisory
message is generated. If the equivalent SCPI command is sent, this same message is generated as
part of a "–221, Settings conflict" warning.
A.07.00
EMI Receiver Mode Reference