Meas Setup - Keysight x-series User Reference Manual

Meas Setup

Displays the menu keys that enable you to setup the measurement.
Key Path
Initial S/W Revision
Select Signal
Specifies the selected signal. The term "Selected signal" is used throughout this document to specify
which signal will be affected by the functions.
Key Path
Notes
Dependencies
Couplings
Preset
State Saved
Min
Max
Initial S/W Revision
Signal List
The Signal List menu allows you to navigate the Signal List with a subset of the functionality available in
the Frequency Scan measurement. For ability to fully manipulate the Signal List, please switch to the
Frequency Scan measurement.
Key Path
Initial S/W Revision
Select Signal
Specifies the selected signal. The term "Selected signal" is used throughout this document to specify
which signal will be affected by the functions.
Key Path
Notes
Dependencies
EMI Receiver Mode Reference
Front-panel key
A.13.00
Meas Setup, Signal List
Front panel only. When Select Signal is the active function, press UP to go up in the signal list, and
press DOWN to go down in the list.
Yes
When the signal list is cleared, this value will reset to 0.
If the signal list is empty, =0
If the signal list is not empty, = number of peaks in signal list table
Saved in instrument state
0
Number of peaks in the signal list table.
A.13.00
Meas Setup
A.13.00
Meas Setup, Signal List
Front panel only. When Select Signal is the active function, press UP to go up in the signal list, and
press DOWN to go down in the list.
Yes
10 Monitor Spectrum Measurement
Meas Setup
779