10 Monitor Spectrum Measurement
Marker
Marker
Access the Marker menu. The functions in this menu include a 1-of-N selection of the control mode
Normal, Delta or Off for the selected marker. If the selected marker is Off, pressing Marker sets it to Normal
and places it at the center of the screen on the trace determined by the Marker Trace rules. At the same
time, the reference value of the selected marker appears on the Active Function area.
The marker X axis value entered in the active function area will display the marker value to its full entered
precision.
Key Path
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision
Select Marker
Display a menu with 12 markers available for selection for the current measurement.
Key Path
Notes
Preset
State Saved
Initial S/W Revision
Normal
Sets the control mode for the selected marker to Normal and turns on the active function for setting its
value. If the selected marker was off, it is placed at the center of the screen on the trace specified by the
marker's Trace attribute.
758
Front-panel key
:CALCulate:MONitor:MARKer[1]|2|...|12:MODE POSition | DELTa | OFF
:CALCulate:MONitor:MARKer[1]|2|...|12:MODE?
CALC:MON:MARK:MODE OFF
CALC:MON:MARK:MODE?
If the selected marker is Off, pressing Marker sets it to Normal and places it at the center of the
screen on the trace determined by the Marker Trace rules. At the same time, Marker X Axis Value
appears in the Active Function area.
Default Active Function: the active function for the selected marker's current control mode. Note
that if the current control mode is Off, there is no active function and the active function is turned off.
Active Function Display: the marker X axis value entered in the active function area will display the
marker value to its fully entered precision.
OFF
Saved in instrument state
A.13.00
Marker
Front panel only. The selected marker is remembered even when not in the Marker menu and is used
Marker 1
Saved in instrument state
A.13.00
EMI Receiver Mode Reference