9 Strip Chart Measurement
Peak Search
Peak Search
Displays the Peak Search menu and places the selected marker on the trace point with the maximum y-
axis value for that marker's trace. If the selected marker is off, it is turned on as a normal marker and a peak
search is performed.
Key Path
Remote Command
Example
State Saved
Initial S/W Revision
Next Peak
Moves the selected marker to the next highest local maximum with a value less than the current marker's.
If the selected marker is off, it is turned on as a normal marker and a peak search is performed.
Key Path
Remote Command
Example
State Saved
Initial S/W Revision
Min Search
Moves the selected marker to the minimum y-axis value on the current trace. If the selected marker is off,
it is turned on as a normal marker and a peak search is performed.
Key Path
Remote Command
Example
State Saved
Initial S/W Revision
664
Front-panel key
:CALCulate:SCHart:MARKer[1]|2|...12:MAXimum
CALC:SCH:MARK2:MAX
No
A.07.00
Peak Search
:CALCulate:SCHart:MARKer[1]|2|...12:MAXimum:NEXT
CALC:SCH:MARK:MAX:NEXT
No
A.07.00
Peak Search
:CALCulate:SCHart:MARKer[1]|2|...12:MINimum
CALC:SCH:MARK:MIN
No
A.07.00
EMI Receiver Mode Reference