Step 3. Modify Scale And The Display Color Bar Settings - Keysight FieldFox B Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
Figure 13-26 Spectrum and Table Type (SSB Offset Detection Softkeys) – 5G NR
Freq/Dist > Freq Mode > Chan or Freq
If Freq then: Meas Setup > More > SSB Offset Detection
If Chan then: Meas Setup > More

Step 3. Modify Scale and the Display Color Bar Settings

To assign colors to low and high power values:
1. Press
2. Press
3. And, then press
386
Scale/Amptd >
color.
Blue Limit to set low power values and to set the color.
System
or other display colors. See also
Red Limit to set high power values and to set the
> Display > Display
Chapter 31, "System Settings."
Keysight N9938-90006 User's Guide
Colors, to set Indoor, Outdoor,