Auto Gate; Figure 2-26 Auto Gate Settings Display; Figure 2-27 Marker 1 Ref Percentage Pop-Up - Keysight N1911A User Manual

2 General Power Meter Functions

Auto Gate

This feature will automatically set the gates (start and stop times of the user
defined time interval) for each measurement relative to the rising and falling
edges' trigger point.
– Proceed to the second page of Gate Ctrl menu and press
– To change the Auto Gate setup:
1 Press
Figure 2-26
Auto Gate Settings enables the placing of markers (gates) at different positions.
NOTE
2 Press
Figure 2-27
90
Auto Gate Settings
Auto Gate Settings display
Gate 1 Ref 1 0.0%
displayed.
Marker 1 Ref Percentage pop-up
softkey.
softkey. The Marker 1 Ref Percentage pop-up is
Keysight N1911A/1912A User's Guide
softkey.
Auto Gate