Match Destination-Address Mac - Dell Networking 7048 Reference Manual

Example
The following example displays adding a match condition to the specified
class.
console(config-classmap)#match cos 1

match destination-address mac

Use the match destination-address mac command in Class-Map
Configuration mode to add a match condition based on the destination MAC
address of a packet.
Syntax
match destination-address mac
macaddr — Specifies any valid layer 2 MAC address formatted as six two-
•
digit hexadecimal numbers separated by colons.
macmask — Specifies a valid layer 2 MAC address bit mask formatted as
•
six two-digit hexadecimal numbers separated by colons. This address bit
mask does not need to be contiguous.
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition for the specified
MAC address and bit mask.
console(config-classmap)#match destination-address
mac AA:ED:DB:21:11:06
macaddr macmask
FF:FF:FF:EF:EE:EE
QoS Commands
681