Match Mac-List - Dell Networking 2024 Reference Manual

Default Configuration
There is no default configuration for this command.
Command Mode
Route Map mode
User Guidelines
The match criteria specified by this command acts on the packet length as it
appears in the IP header and is not necessarily correlated with the frame
length as it appears on the wire.
Example
console(config-route-map)#match length 64 1500

match mac-list

Use this command to configure MAC ACL match criteria for a route map.
Use the no form of this command to delete the match statement from a route
map.
Syntax
mac-list-name
match mac-list
no match mac-list [
• mac-list-name —The MAC ACL name that identifies the MAC ACLs. The
name can be between 0 and 31 characters.
Default Configuration
There is no default configuration for this command.
Command Mode
Route Map mode
User Guidelines
The MAC ACL must be configured before it is linked to a route map. Trying
to link to an unconfigured MAC ACL causes an error.
mac-list-name
[
mac-list-name
]
]
IP Routing Commands
1057