Avaya S8700 Maintenance Manual page 2065

RDIG-STA (Remote Digital Station)
Download Actions
There are several different scenarios which causes a terminal to be downloaded.
These can occur as part of background maintenance activity or on demand from
the SAT (System Access Terminal) or from a station.
For the background actions described below, the terminal downloads
automatically if a download retry flag for the terminal is set in software. This flag is
set at the time translation is loaded at boot time, when the translation that affects
the parameters of a terminal is changed as part of system administration actions,
or when a port is inserted in software as a result of board insertion or translation
change.
Automatic Download Actions
1. System Reboot/Restart
A global download action is initiated when periodic maintenance tests
begin after a system reboot/restart, regardless of whether the parameters
have been downloaded previously.
2. Periodic tests
If the download flag is still set when periodic tests are run on a terminal, a
download action will occur. This action is required in case a terminal could
not be downloaded previously, either because the terminal was off-hook
when the:
3. Terminal Administration
A downloadable terminal is automatically downloaded when translation
changes associated with downloadable parameters are made as part of
system administration. As shown in the previous table, these changes can
be for a specified terminal or may be system-wide. If the change is for a
system-level parameter, a background global update request must be
submitted to download every programmable terminal.
555-233-143
System first booted
Translations associated with downloadable parameters were
changed.
NOTE:
It may take more than an hour for periodic tests to reach the terminal
that needs to be downloaded.
NOTE:
This global update may take more than an hour for a system with
several thousand programmable terminals.
Issue 1 May 2002 8-1343