Change The Modem Settings On The Configure Server Maintenance Web; Connect And Enable The Usb Modem - Avaya G250 Installing And Upgrading

Connecting and enabling a modem for remote access
4. Click Continue. The Logon screen for Avaya Integrated Management appears.
5. Enter your S8300 initial entry username in the Logon ID box.
6. Click Logon. The password field appears.
7. Enter your password in the password field, and click Logon. The main menu for Avaya
Integrated Management appears.
8. From the Integrated Management main menu, select Launch Maintenance Web Interface.
The Maintenance Web Pages Notice page appears, with a navigation menu at the left.
9. Leave the Maintenance Web Pages open to perform the tasks described in the coming
sections.
Change the modem settings on the Configure
Server Maintenance web pages
If you have an Avaya Maintenance contract, change the modem settings on the Configure
Server Maintenance Web Pages.
1. Select Configure Server from the left-hand menu on the Maintenance web page. The
Back Up Data page appears.
2. Follow the on-screen instructions to back up the current data.
3. Click Continue.
4. Select Configure individual services.
5. Click Continue.
6. From the left navigation menu, click Set Modem Interface. The Set Modem Interface page
appears.
7. Enter the RAS IP address you obtained using the ART tool. See
Registration Tool (ART) for the RAS IP address
8. Click Change modem settings.
9. Click Continue.
10. Click Close Window.

Connect and enable the USB modem

If your installation includes an S8300 Server module, you need to connect the USB modem to
the S8300. After the G250 is configured, you can leave the modem permanently connected to
enable the S8300 to report alarms to remote locations.
1. Connect the USB modem to a working telephone line.
54 Installing and Upgrading the Avaya G250 Media Gateway
Run the Automatic
on page 20.