Re-Enable Tti; Enable Scheduled Maintenance - Avaya CMC1 Installation, Upgrades And Additions

Upgrading R6csi/R7csi/R8csi to Avaya MultiVantage
Software on an Avaya DEFINITY Server CSI
4. Type display communication links and press
Status each of the links.
5. Type list signal press
.
Enter
6. Execute the following commands and verify that the information is correct:
list station
list trunk-group
list hunt-group
list data-module

Re-enable TTI

NOTE:
Do this step only if you disabled TTI before the upgrade.
1. Type change system-parameters features and press
2. On the second screen, set the Terminal Translation
Initialization Enable field to y to re-enable the TTI feature.
3. Type status tti and press
4. Wait until the TTI Background Task State reads completed.

Enable Scheduled Maintenance

1. Type change system-parameters maintenance and press
2. Check the Start Time and Stop Time fields.
3-20
Issue 5 October 2002
NOTE:
ISDN-PRI D-channel links no longer appear on this screen. (For
Release 7 and later, ISDN-PRI resides on the network packet circuit
pack.) For Release 7 and later, the only way to determine if an
ISDN-PRI D-Channel is up is to type status signaling group and
press .
Enter
. For each signal, type status signal and press
Enter
NOTE:
Check the ISDN-PRI D-channel links here.
Enter
.
Enter
.
.
Enter
.
Enter
555-233-118