Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
8.3.19.0
8.3.12.0
8.3.16.0
Example
Dell# show iscsi
iSCSI is enabled
iSCSI session monitoring is disabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
Related Commands
•
•
•
show iscsi session
Display information about active iSCSI sessions on the switch.
Syntax
show iscsi session
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
8.3.19.0
8.3.12.0
8.3.16.0
Example
Dell# show isci session
Session 0:
908
iSCSI Optimization
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
show iscsi session
— display information about active iSCSI sessions on the switch.
show iscsi session detailed
show run iscsi
— show run iscsi.
EXEC
EXEC Privilege
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
— display detailed information about active iSCSI sessions on the switch.