Isis Mesh-Group - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

isis mesh-group

isis mesh-group { blocked | number }
Syntax
no isis mesh-group
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures an interface in the same mesh group to act as a virtual multiaccess
Description
network. The no version disables the feature.
Options
Interface Configuration, Subinterface Configuration
Mode
1112
isis mesh-group
blocked Blocks reserved LSPs from being flooded out on this defined configured
interface
number Mesh group number in the range 1–4294967295