3Com S7906E Command Reference Manual page 81

Features
VLAN Mapping
Ethernet OAM
Connectivity Fault
Detection
EPON OLT
MSTP
RRPP
The VLAN mapping feature maps CVLAN tags to SVLAN tags. This
document introduces the commands for:
Configuring One-to-One VLAN Mapping
Configuring Many-to-One VLAN Mapping
Configuring One-to-Two VLAN Mapping
Configuring Two-to-Two VLAN Mapping
Ethernet OAM is a tool monitoring Layer-2 link status. It helps network
administrators manage their networks effectively. This document
introduces the commands for:
Configuring Basic Ethernet OAM Functions
Configuring Link Monitoring
Enabling OAM Loopback Testing
Connectivity fault detection is an end-to-end, per-VLAN link-layer OAM
mechanism for link connectivity detection, fault verification, and fault
location. This document introduces the commands for:
Configuring CC on MEPs
Configuring LB on MEPs
Configuring LT on MEPs
EPON is a Passive Optical Network (PON) that carries Ethernet frames
encapsulated in 802.3 standards. It is a combination of the Ethernet
technology and the PON technology. This document introduces the
commands for:
OLT Configuration
ONU Remote Management Configuration
UNI Port Configuration
Alarm Configuration
MSTP is used to eliminate loops in a LAN. It is compatible with STP and
RSTP. This document introduces the commands for:
Configuring the Root Bridge
Configuring Leaf Nodes
Performing mCheck
Configuring Digest Snooping
Configuring No Agreement Check
Configuring Protection Functions
RRPP is a link layer protocol designed for Ethernet rings. RRPP can
prevent broadcast storms caused by data loops when an Ethernet ring is
healthy, and rapidly restore the communication paths between the nodes
after a link is disconnected on the ring. This document introduces the
commands for:
Configuring Master Node
Configuring Transit Node
Configuring Edge Node
Configuring Assistant Edge Node
Configuring Ring Group
Description