Line Calculation - Offset Point - Leica TPS1200 series Technical Reference Manual

Hide thumbs Also See for TPS1200 series:

Table of Contents

COGO line calculation

offset point step-by-

Line Calculation - Offset Point

The COGO line calculation offset point calculates the coordinates of a new point after input

of station and offset values in relation to a line.

Elements that must be known are

coordinates of two points.

coordinates of one point.

bearing and distance from one point.

The coordinates of the known points

may be taken from the active job.

may be measured during the COGO calculation.

may be entered.

Line management is not available for COGO line calculations.

The following table explains the most common settings. Refer to the stated chapter for more

information on screens.

Refer to "36.2 Accessing COGO" to access COGO Line Calcula-

tions Input.