9.2
Problem
Adjustment step-
by-step
3D Disto
, Check & Adjust
Crosshairs Offset
The laser point and the crosshairs in the Viewfinder do not coincide.
Before calibration:
3D Disto_029
a) Crosshairs
b) Laser spot
1. Calibration is started in Menu » Device » Calibration.
2. Press
.
3. Viewfinder opens. Place a target mark at a distance > 25 m. Now aim at the
target mark as precisely as possible. Press
exactly on the target.
After calibration:
a
b
3D Disto_030
when the red laser spot is
151