Crosshairs Offset - Leica 3D Disto User Manual

8.3
Description
Adjustment step-by-
step
78
Step Description
2.
Press .
3. 3D Disto starts self-levelling automatically: the tilt is checked and
the instrument levels itself if the tilt is < 3°.
Pop-up prompts Don't touch 3D Disto about 1 minute!
☞
4. If ok, pop-up prompts Calibration successful.

Crosshairs Offset

The laser point and the crosshairs in the Pointfinder do not coincide.
Before Calibration:
3D Disto_029
a Crosshairs
b Laser point
Step Description
1. Calibration is started in Menu » Device » Calibration.
2.
Press .
3. Pointfinder opens.
Place a target mark at a distance > 25 m.
4.
Now aim at the target mark as precisely as possible. Press
when the red laser spot is exactly on the target.
5. Pointfinder stays open and red crosshairs are displayed.
Move crosshairs to the centre of target mark as precisely as pos-
sible with the arrow keys. Press
6. If in tolerance, pop-up appears with Set new: x=...px; y=...px,
Reset to factory default, or Cancel calibration.
7. Choose Set... or Reset... to adjust crosshairs. Final pop-up asks
Are you sure? Yes/Cancel.
8. If Yes, checkmark is displayed to confirm parameters were set suc-
cessfully.
After Calibration:
a
b
3D Disto_030
again.
Check & Adjust