Version Upgrade; Function Overview; Version Upgrade Using Ust; Version Upgrade Via Internet - Canon imageCLASS MF269dw Service Manual

Version Upgrade

Function Overview

The following firmware upgrade methods are available with this device.

Version Upgrade Using UST

Upgrade the firmware of the device using UST.
Open the file for UST version upgrade on a PC connected with the device and upgrade the firmware.
Since the work is performed by connecting the host machine and the PC using a USB Cable, version upgrade can be
performed also in an environment where network is not available.

Version Upgrade via Internet

Access the dedicated server, and download and update the firmware.
Provided that Internet connection is available, the system automatically configures the connection destination setting and
executes processing such as download and version upgrade.
Version upgrade by replacing the PCB
Version upgrade by replacing the existing PCB with a PCB where the latest firmware is installed
Version Upgrade Using UST
UST is included in the firmware for the machine that can be downloaded from the website of CINC. Firmware is downloaded as
a zip file and a folder containing UST is extracted by decompressing the file.
When executing UST on the PC connected to the machine with a USB Cable, the firmware can be upgraded by downloading it
from the PC to the machine. For the detailed procedure, refer to "User Support Tool Operation Guide" stored in the decompressed
folder. "User Support Tool Operation Guide" is also available on the website of CINC.
Version Upgrade via Internet
Connect to the Internet using the network function of the device, and download and upgrade the latest firmware from the server.
If the device is in an environment where Internet connection is available, firmware versions can be upgraded only by operation
from the menu without using PC.
■ Prerequisite
In order to perform version upgrade of the device via Internet, the following conditions must be met.
There should be no other jobs being executed.
Firmware cannot be upgraded while there is a job being executed. If there is a job being executed, wait for completion of the
job and then perform the work.
The device should be able to be connected to the external network.
If connection is not available because, for example, there is a proxy server, follow the e-Manual to configure the proxy server
settings and enable connection to the external network.
("Version Upgrade Using UST" on page
("Version Upgrade via Internet" on page
231)
231)
Firmware
Firmware
USB cable/
Network cable
231
6. Troubleshooting
PC