Mac Learning-Limit Station-Move-Violation; Mac Learning-Limit Reset - Dell Force10 Z9000 Reference Manual

mac learning-limit station-move-violation

Specify the actions for a station move violation.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, followed by the configured keyword.
Parameters
log
shutdown-both
shutdown-
offending
shutdown-
original
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.8.1.0
Version 7.5.1.0
Usage This is supported on physical interfaces, static LAGs, and LACP LAGs.
Information
Related show mac learning-limit
Commands

mac learning-limit reset

Reset the MAC address learning-limit error-disabled state.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mac learning-limit reset
Enter the keyword log to generate a syslog message on a station
move violation.
Enter the keyword shutdown to shut down both the original and
offending interface and generate a syslog message.
Enter the keywords shutdown-offending to shut down the
offending interface and generate a syslog message.
Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– displays details of the mac learning-limit.
925