Offline System - Dell Z9500 Command Reference Manual

Version 8.3.7.0
Version 8.3.1.0
Version 7.7.1.0
Related
offline stack-unit
Commands
online

offline system

Place the switch in the offline state in order to run diagnostic tests.
Z9500
Syntax
offline system
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.7.1.0
Usage
To run diagnostic tests on an offline switch, use the diag command.
Information
The system reboots when offline diagnostics complete. This reboot is an automatic
process. A warning message appears when the offline system command is
implemented.
Warning - Diagnostic execution will cause system to reboot
after completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
Debugging and Diagnostics
Introduced on the S4810.
Introduced the verbose option.
Introduced on the S-Series.
— bring a switch offline to run diagnostic tests.
stack-unit— reload the system after running offline diagnostic tests.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added a warning message to the off-line diagnostic.
Introduced on the S-Series.
651