Virtual Ip Configuration Options - Avaya Aura Deployment Manual

Item name
Initial cluster
node
Local node IP
address

Virtual IP configuration options

Option
Enable virtual IP
October 2018
Description
The setting to specify if the server where
you are performing the installation is the
initial node in a cluster.
Select y (yes) to set the current node as
the initial node in the cluster or n (no) to
set the current node as an additional
node.
The default value for this setting is y
(yes).
In a standalone installation, set this value
to y (yes).
If you configure this setting to n (no), the
following settings become visible and
must be configured:
• The IP address of the initial cluster
node.
• The ID of the Linux user performing the
installation on the initial node.
• The Cassandra database user name for
the initial node.
• The Cassandra database password for
the initial node.
The IP address of the local node.
Description
The setting to enable the usage of a
virtual IP address.
If you select n (no), the configuration script
does not configure the virtual IP address.
If you select y (yes), new configuration
settings for the virtual IP address are
displayed in the configuration menu.
Deploying the Avaya Aura
Comments on this document? infodev@avaya.com
®
Avaya Aura Web Gateway initial configuration settings
Equivalent
installation.properties file
parameter
INITIAL_NODE
If you configure this setting to n (no),
you must also configure the following
parameters:
• SEED_NODE
• REMOTE_UID
• CURRENT_CASSANDRA_USER
• CURRENT_CASSANDRA_PASSWORD
CLUSTER_IP_ADDR
Equivalent
installation.properties file
parameter
KA_ENABLED
®
Web Gateway
Table continues...
91