DHCPv4 commands
Example
AG/configure# hostname 10.1.10.1
configure interface dhcp-relay
Use this command to configure the DHCP relay server and gateway addresses.
Syntax
dhcp-relay <server-ip-address> <gateway-ip-address>
Example
AG/configure/interface/ethernet (6/13)# dhcp-relay 120.5.4.3
100.4.3.2
configure ip dhcps enable
Use this command to enable the DHCP server.
Syntax
[no] enable
Example
AG/configure/ip/dhcps# enable
configure ip dhcps interface
Use this command to enable DHCP server on an interface.
Syntax
interface <interface-name>
Table 142: Variable definitions
Variable
<interface-name>
Example
AG/configure/ip/dhcps# interface ethernet0/1
158
Command Line Reference
Value
Specifies the Ethernet slot and port or the
VLAN interface name.
Comments? infodev@avaya.com
August 2013