Additional Configuration That Might Be Needed - Avaya IG550 Installing And Configuring

Note:
To complement the USB modem setup for remote dial-in, you must turn off IP
Note:
compression on the computer you are using to remotely access the modem. See
Administration Guide and CLI Reference for the Avaya IG550 Integrated
Gateway, 03-601883.

Additional configuration that might be needed

The configuration file on the Disk-on-Key might vary in the extent to which the router is
configured. The following configuration items are mandatory and will always be included in the
configuration file:
Router Gigabit Ethernet address
●
TGM550 IP address and slot number
●
vp (or TGM550) interface address, which is used for communication between the router
●
and the TGM550
Media Gateway Controller (MGC) list
●
Root user password
●
Other items that the file might also include are:
WAN DS1 PIM
●
WAN DS3 PIM
●
ISDN-BRI S/T or U PIM
●
ADSL PIM
●
G.SHDSL PIM
●
Fast Ethernet PIM and ePIM
●
Serial port
●
Gigabit Ethernet ePIM or uPIM
●
Static route
●
OSPF
●
RIP
●
BGP
●
Issue 2 January 2008 43