Renault Laguna III Manual page 2465

MECHANICAL COMPONENT CONTROLS
Automatic gear control cable: Removal - Refitting
D91, and AJ0, and RIGHT-HAND DRIVE
a Press the clip (16) .
a Adjust the control unit (see 37A, Mechanical com-
ponent controls, Gear control unit: Adjustment,
page 37A-109) .
a Check that the system and gear selection are work-
ing correctly.
III - FINAL OPERATION
a Clip on the left-hand air duct.
a Refit the airbag computer protector.
a Clip the wiring onto the airbag computer protector.
a Refit the control unit soundproofing.
a Clip the wiring onto the control unit.
a Clip the carpet at the cutting point.
a Place the gear selector in position R.
a Refit:
- the middle air duct (see Rear air distribution
duct: Removal - Refitting) (61A, Heating system),
- the central console (see Centre console: Remov-
al - Refitting) (57A, Interior equipment),
- the gear lever knob.
a Turn the ring on the gear lever knob a sixteenth of a
turn.
V4Y
a Refit the air filter unit air outlet pipe on the throttle
valve.
a Torque tighten the air filter unit air outlet pipe clip
on the throttle valve (5.5 N.m).
a Connect the non-return valve pipe on the intake dis-
tributor.
a Clip the non-return valve pipe onto the air filter unit
air outlet pipe.
a Refit the engine cover.
V9X
a Refit:
123285
- the protection and switching unit (see Protection
and Switching Unit: Removal - Refitting) (87G,
Engine compartment connection unit),
- the air outlet pipe of the air filter unit.
a Torque tighten the clip of the air filter unit air out-
let pipe (6 N.m).
a Connect the oil vapour rebreathing pipe.
a Clip the vacuum pipes onto the air filter unit air outlet
pipe.
37A-131
37A