MECHANICAL COMPONENT CONTROLS
Automatic gear control cable: Removal - Refitting
D91, and AJ0, and LEFT-HAND DRIVE
a Unclip:
- the wiring on the reinforcement at (7) ,
- the left-hand air duct (8) .
a Remove:
- the dashboard lower trim (see Dashboard lower
trim: Removal - Refitting) (57A, Interior equip-
ment),
- the reinforcement upper nuts,
- the reinforcement lower bolts (9) ,
- the reinforcement (10) ,
- the accelerator pedal (see 37A, Mechanical com-
ponent controls, Accelerator pedal: Removal -
Refitting, page 37A-19) ,
- the air filter unit (see Air filter unit: Removal - Re-
fitting) (12A, Fuel mixture),
- the control unit (see 37A, Mechanical component
controls, Gear control unit: Removal - Refitting,
page 37A-95) .
V4Y
122729
a Remove the front engine cover.
a Disconnect the non-return valve pipe (11) from the
intake distributor.
a Unclip the non-return valve pipe from the air filter
unit air outlet pipe.
a Loosen the clip (12) on the air filter unit air outlet
pipe on the throttle valve.
a Remove the air outlet pipe from the air filter box.
37A-122
37A
133471