Isis Csnp-Interval - Dell S6100 Configuration Manual

isis csnp-interval

Configure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Syntax isis csnp-interval seconds [level-1 | level-2]
To return to the default values, use the no isis csnp-interval [seconds] [level-1 | level-2]
command.
Parameters
seconds
level-1
level-2
Defaults seconds = 10; level-1 (if not otherwise specified)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
Usage Information
The default values of this command are typically satisfactory transmission times for a specific interface on a
designated intermediate system. To maintain database synchronization, the designated routers send CSNPs.
You can configure Level 1 and Level 2 CSNP intervals independently.
isis hello-interval
Specify the length of time between hello packets sent.
Syntax isis hello-interval seconds [level-1 | level-2]
864 Intermediate System to Intermediate System (IS-IS)
Interval of transmission time between CSNPs on multi-access networks for the
designated intermediate system. The range is from 0 to 65535. The default is 10.
(OPTIONAL) Independently configures the interval of time between transmission of
CSNPs for Level 1.
(OPTIONAL) Independently configures the interval of time between transmission of
CSNPs for Level 2.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.