Display Rmon Eventlog - H3C S5120-SI Series Command Reference Manual

Displayed information includes event index, event owner, event description, action triggered by the
event (such as sending log or trap messages), and last time the event occurred (the elapsed time since
system initialization/startup) in seconds.
Related commands: rmon event.
Examples
# Display the configuration of RMON event table.
<Sysname> display rmon event
EventEntry 1 owned by user1 is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 1-2 display rmon event command output description
EventEntry
owned by
VALID
Description
cause log-trap when triggered
last triggered at

display rmon eventlog

Syntax
display rmon eventlog [ entry-number ]
View
Any view
Default Level
1: Monitor level
Field Description
Event entry, corresponding to the MIB node eventIndex.
Owner of the entry, corresponding to the MIB node
eventOwner.
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means invalid.
You can use the display rmon command to view the
invalid entry; while with the display
current-configuration and display this commands you
cannot view the corresponding rmon commands.),
corresponding to the MIB node eventStatus.
Description for the event, corresponding to the MIB node
eventDescription.
The actions that the system will take when the event is
triggered:
none: The system will take no action
log: The system will log the event
snmp-trap: The system will send a trap to the NMS
log-and-trap: The system will log the event and send a
trap to the NMS
This field corresponds to the MIB node eventType.
Time when the last event was triggered, corresponding to
the MIB node eventLastTimeSent.
1-3